Teak Shower Floor: Transform Your Bathroom Into An Exotic Space
Teak shower flooring is a floor constructed from tropical hardwood, which doesn’t thrive in all climates and is extremely sought-after. It’s among the most durable hardwoods and has several advantages since it’s resistant to pests, water, and rot.
This isn’t the beginning of the cap when it is about the advantages of teak. The wood is used to make flooring and furniture.
What Is A Teak Shower Floor?
A Teak Shower Floor isn’t a shower floor made of teak. Instead, it’s an insert made from teak. The insert is constructed into slats which are rolled out as bamboo mats. It is also customizable to become an edging tray. It depends on what shape you want, the dimensions of the shower, and the length of time you would like the teak flooring to be.
Pros And Cons Of A Teak Shower Floor
Naturally, teak is an important resource with a list of cons and pros. However, the list of cons and pros regarding shower flooring is even greater. Take a look at these arguments to purchase and avoid teak shower flooring.
Beautiful The beauty of this is clear. Teak is an incredibly beautiful wood, particularly when maintained. Make sure it is clean and oily, and you’ll enjoy the most stunning shower flooring ever seen.
Durable It’s no fact that teak is among the most sturdy woods you can find. It’s easier to chip or scratch than other woods. It’s just a good wood that lasts for quite a long time.
Water-Resistant Shower floors made of teak are exceptionally water-resistant and suitable for wood. Most woods will rot within weeks, but teak never grows or expands when exposed to water. However, you must ensure that you protect it with a good seal.
Pest-Resistant teak is resistant to pests since it is water-resistant. It doesn’t absorb moisture like other woods do, therefore, cockroaches, termites, and other insects aren’t attracted by it. In addition, it’s difficult for them to get into.
Rustic and Historical The final word is that teak is a wonderful wood with a unique history. Knowing more about teak could inspire you to buy it more because it’s stunning. It’s a part of Asian culture with a rustic look.
Not impermeable Although it’s water-resistant but teak isn’t completely waterproof. Water can pass through but it won’t remain or expand. It’s also true that less water can pass through. But it’s not completely immune.
Complex Maintenance requires lots of time and attention to keep it in top form. It is essential to clean and oil it often. If you cannot take care of this, it will be durable but not look as attractive.
Do not use bathroom cleaners since they must be kept clean, and using any bathroom cleansers on teak is not recommended. It’s much more secure and safe to purchase the right cleaner for teak. Otherwise, you’ll risk losing your money.
Cracks in Shower Floors are Not ideal. If you’re not the type who takes your shower, insert out and in each day, then teak might not be the ideal choice. It’s because bacteria could be able to grow beneath the insert and cause harm to those who use the bathroom.
Pricey Finally, teak is among the most expensive woods available. You can’t get it inexpensive, and it is available in small pieces too, which can fool people into thinking that you’re receiving a great deal.
The teak timber requires special attention. It is, therefore, essential to maintain its polish frequently. You’ll require special polish designed specifically for teak wood. It’s quite easy to do but must be handled carefully to avoid harming the wood teak.
Step 1: Cleaning
Before polishing the wood, washing it with a gallon of water and a tiny amount of dish soap is best. Then, gently scrub the surface. Rinse it off by taking a shower. After that, let drying the surface dry before going on.
Step 2: Applying Oil
Begin by following the steps for the teak oil polisher. It is usually a matter of gently rubbing the wood using the teak oil like you would polishing a shoe made out of leather. It is also common to allow it to be set for a few hours.
Step 3: Polishing
In the end, make tiny circular motions to smooth the dried oil. Polish until you see an appearance. The shine will not only be attractive for months but will also safeguard the wood. Teak is naturally rich in oil, and it thrives in teak oil.
How To Install A Teak Shower Floor
If you want to create the perfect teak shower flooring, You can! Teak can be purchased from most hardware stores if they still need to get it in stock, but many stores offer pre-made slats that you need.
Step 1: Measuring
This crucial step should be repeated. The shower floor should be measured and recorded somewhere. Next, measure it again and determine if it’s the same. Note this down while cutting the boards. You can draw the diagram if you want to.
Drawing a diagram is an excellent idea for building. Keeping everything clear and well-organized can result in fewer mistakes when it comes to construction. Therefore, take your time to organize and get it done.
Step 2: Planning
The slats should be spaced about half an inch in distance. They also require 1/2 inch for each side. The entire insert should be 1 inch smaller than the shower floor. For spacing, consider this.
Place your boards on cardboard or a measuring tape on the floor of your shower. Note them and leave a one-half-inch space between them. This way, you won’t need to be concerned about whether your calculations are accurate. You’ll be able to see what you must do.
Step 3: Cutting
Then, it’s time to begin cutting. Cut slats 1-2 inches long across the long way around your shower. Then, spread them out so that they fit perfectly. Create three or two bracing boards to support the back. Then, lay the slats down and mark them.
Step 4: Screwing Them In
Then, screw the slats onto the bracing boards to fix them. Then, you’ve got an insert. Utilize the insert by placing it inside the bathroom whenever you’d like to use it. It’s best to avoid leaving it in the shower all the time.
Take it out to clean it every week. Examine for any evidence of mold and also determine whether it needs polishing. It is the ideal moment to polish it. Every week, you can ensure the teak flooring lasts for years if you do it correctly.
Although teak is the most popular choice, however, there are a handful of other shower floor alternatives that could work the same way. They’re also water-resistant and durable and therefore are a great alternative to tiles.
Other Wood Shower Floor Options
Like teak, cedar can be an extremely durable and water-resistant wood commonly utilized in bathrooms. It thrives in colder conditions with lots of moisture and snow and adapts to harsh environments.
The cedar’s resins that naturally occur make it more durable and resistant to rot over other types of wood. This makes it an excellent wood shower floor which smells wonderful and is a must say.
White oak is a stunning hardwood that is nearly completely impervious to moisture. It is a hardwood that has extremely close pores. It is more sturdy than spongy as a softwood that has larger pores.
Hinoki is not only water-resistant Japanese wood and is also believed to possess the ability to heal or purify. This makes it ideal for a shower floor made of wood and bathrooms. It is typically utilized in saunas and similar projects.
Choosing Your Shower Floor
If you are a fan of teak shower floors, but you want to play it safe, You can build shower floors, shower surrounds, or even small furniture for your bathroom.
Frequently Asked Questions (FAQ)FAQ
Do Teak Shower Floors Get Moldy?
The floors are resistant to water for wood. Most woods can mold within months, but teak seldom molds or expands when exposed to water. However, you must ensure that you ensure that it is well-protected.
Can You Clean the Teak With Vinegar?
Utilizing a teak cleaner or a homemade mixture of hot water and vinegar, evenly cleanse the surface using the help of a soft cloth. Allow the solution of vinegar to sit in the teak for around 15 minutes before cleaning the surface with an appropriate sponge in line with the grain of the timber.
Is Teak Good In A Walk In Shower?
Teak is a fantastic option for shower benches due to its water-resistant qualities. Shower mats made of teak can be a great option as the wood is a high percentage of resins with elastic properties that create a slip-resistant surface. They are also immune to bacteria or mold, an added benefit.
How Do You Get Mold Out Of Teak?
Mix a mixture that contains oxygen bleach. One cup of bleached powder for one gallon of hot water can remove dirt, algae, mildew, and mold. It will also remove most of the wood staining or sealers on the teak. Mix the bleach in the water until it’s fully dissolving.
Is Teak Wood Waterproof?
Teak is unique among woods. It is not just a durable, strong wood, but it also produces an oil that is it’s own and has a large wax content. It is the best material for outdoor furniture as the teak oil renders it impervious to water and inaccessible to wood-eating insects.
Teak Shower Floor Conclusion
Teak wood is ideal for your shower flooring. If you’re searching for an upgrade to your bathroom, teak wood will be the best option. Shower floors can be a lot of fun and can give your bathroom an exotic beach-like feel.